Showing 1–9 of 17 results
$1,190.00 – $1,440.00
Now introducing fully dynamic suspension for the 9×1 platform! The DSC Sport V3 controller features all the same great technology and tuning capabilities as the V1 9×7. Additionally, the V3 controller introduces velocity compatibility and magnetic motor mount tuning control.
All 981/991 models are Velocity compatible, made possible by the factory four wheel ride height sensors now equipped on all models. Velocity tuning allows adjustment based on the velocity of the piston rod movement, more accurately tuning the chassis to road surface changes. This feature provides a new dimension of tuning that maximizes both performance and comfort.
The V3 controller also improves upon the dynamic engine mount control offered as an option from the factory. This is a vital improvement for precision handling in fast corners, high speed transitions, and rapid load changes.
Please Note: 997.1 Turbo vehicles require the 997.2 DSC Sport controller w/out Accelerometer
All 997.1 Non-turbo vehicles require the DSC Sport Accelerometer (included in selection of 997.1 DSC)
V1 Controller for 987, 997 Vehicles
V3 for 991, 981, 718 Vehicles
Select options 
$275.00
At TPC Racing we strive to design and produce products for those who demand the best in performance from their Porsche vehicles. Using our vast knowledge and experience on and off the track, we have designed the TPC Racing Adjustable Thrust Arm Bushing Kit, for the driver looking to get the most out of their car.
FIND THE PERFECT SETUP
TPC Racing Adjustable Thrust Arm Bushing Kits are the perfect answer for both a street driven car, the occasional track day car, or for any full race effort. The TPC Racing Adjustable Aluminum Thrust Arm Bushings are designed to replace the factory rubber bushings, which cause unwanted caster changes under acceleration and deceleration. Elimination of these rubber bushings results in more precise and consistent handling on both the road and track. TPC Racing Adjustable Thrust Arm Bushings also allow for a wide range of caster adjustment. Because the vehicle's suspension geometry and rate change as you accelerate and decelerate, it is essential to have enough adjustability and rigidity on the suspension to combat any negative handling characteristics the vehicle may exhibit.
TPC Racing Adjustable Thrust Arm Bushing Kits are the best solution whether you are trying to achieve the perfect race setup or just increase everyday drivability. TPC Racing Adjustable Thrust Arm Bushing Kits are made from 100% aircraft grade material.
Also TPC Racing is one of the only sources to offer you with 2 different sizes of Adjustable Thrust Arm Bushings.
Applications available for:
Thicker Unit-
-987 Boxster/Cayman/S Front Control Arm
-997 06+ Front Control Arm
Thinner Unit-
-986 Boxster Front & Rear
-996 Front & Rear
-996/997 GT2/GT3/RS Front & Rear
-997 06+ Rear
-987 Boxster/Cayman/S Rear
*Sold in sets of 2. One set required per axle.
Select options 
$1,750.00
Add to cart
More Sound. More Power. No Drone.
Are you looking for more sound out of your 997/991 GT3 without sacrificing street drivability? Look no further than the TPC Racing Active Side Muffler Bypass pipe. It provides cup car sound and performance when you want it, while eliminating unwanted cabin drone and excessive noise in normal street conditions. All this while improving performance and handling.How it works
Using a factory-style actuator-controlled valve, the TPC Racing Active Side Muffler Bypass System provides cup car sound and performance in higher rpm/higher load ranges, while eliminating unwanted cabin drone and excessive noise. Its lightweight design saves 40 lbs from the OEM side mufflers, resulting in improved handling. Better exhaust flow management allows for increased torque between 2,600 and 5,600 rpm, as well as increased horsepower between 5-8,250 rpm.Features
• 40 lb. Weight Reduction from OEM • Factory-Style Actuator-Controlled valve • Metal Flex Joint for Easy Installation/Proper Fitment • Metal Flex Joint Reduces Chance of Center Muffler Fatigue • Machined/Fabricated In-House • Each Unit is Handmade in the USA • Stainless Steel Construction with Brush Finish
$795.00 – $870.00
Our new 991 Safety Harness Bar featured on our TPC Racing/DSC Sport USCA GT2RSx build!
Developed with Safety first in mind, this Harness Bar is a bolt-in product with no modifications needed and available in three different options, Raw Metal, Raw with Clear Coat, and Powder-coated Black. This Harness bar is compatible for the 991 Porsche vehicles factory equipped with Rear Seats (Bolts onto rear seat anchors). This includes the 911 Turbo, Turbo S, Carrera Base, Carrera S, and GTS models.
***This Harness Bar is NOT compatible for Porsche 991 vehicles without factory equipped rear seats as they don't have the anchor point.
Currently Stock is Raw Metal. Powder coating selection is a minimum of 1 week lead time. Painted black is optional instead of the Powder Coating.
Select options 
$5,200.00
Add to cart
- Porsche 991 Turbo & Turbo S Valved Exhaust Muffler
- CES-3 Programmable Remote
